Keysight PathWave X 系列量測應用軟體PathWave X-Series Measurement Applications

推薦使用X 系列量測應用軟體,可加快測試速度的重要信號分析儀量測應用軟體。信號分析儀應用軟體可為通用型應用、蜂巢式通訊應用和無線連結應用的特定任務提供重要量測,並涵蓋各項最新標準或調變類型

 
N9080EM0E LTE and LTE-Advanced FDD Measurement Application, Multi-Touch UI
Keysight N9080EM0E LTE and LTE-Advanced FDD Measurement Application, Multi-Touch UI Perform LTE and LTE-Advanced FDD base station (eNB) and user equipment (UE) transmitters one-button measurements with pass/fail tests as defined by 3GPP standard * N9080EM0E - Perform LTE and LTE-Advanced TDD transmitter one-button uplink and downlink measurements with pass/fail tests per 3GPP standard Release 8 to 15 - Pre-defined E-UTRA Test Configurations for multi-carrier (MC) and carrier aggregation (CA) - View and analyze up to five component carriers (CCs) simultaneously in both contiguous and non-contiguous configurations - Pursue improved spectral efficiency with higher order demodulation to 1024QAM - Spectrum and power measurements: channel power, SEM, cumulative SEM, ACLR, cumulative ACLR (CACLR), OBW, spurious emissions, transmitter intermodulation - Modulation analysis measurements: EVM, frequency error, time alignment error, RSTP, OSTP, I/Q offset and more. Pinpoint signal impairments with color-coded traces like EVM vs. symbol, EVM vs. subcarrier, detected allocations (subcarrier vs. symbol), constellation diagram, and frame summary - Performance: Residual EVM, 5 MHz downlink signal: up to 0.34% (0.28% nominal); ACLR, 5 MHz E-UTRA adjacent channel: up to -83.5 dB (nominal); Absolute power accuracy: up to ▒0.19 dB - Support multi-touch user interface and SCPI remote interface programming - KeysightCare software support subscription included
N9081EM0E Bluetooth® 量測應用軟體,適用於 CXA [可取代W9081A]
Keysight N9081EM0E Bluetooth® 量測應用軟體,適用於 CXA [可取代W9081A] 目前W9081A Bluetooth® 量測應用軟體已停產,取代產品為PathWave X 系列量測應用軟體的N9081EM0E ,歡迎右下角洽詢小編 * Keysight N9081EM0E Bluetooth® 量測應用軟體 - Complies with Bluetooth« Core Specification Version 2.1+ EDR, Low Energy (4.0 and 4.2) and the latest Bluetooth 5 and 5.1 - Support transmitter analysis of combined output power (Basic Rate or Low Energy) or EDR relative power and modulation measurements associated with multiple results at a single time - Spectrum measurement: output power, output spectrum bandwidth, adjacent channel power and EDR in-band spurious emissions etc. - Modulation analysis: deviation, initial carrier frequency tolerance (ICFT), carrier frequency drift, EDR frequency stability and EDR modulation accuracy etc. - Performance: output power accuracy up to 0.20 dB; FM deviation range 250 kHz full scale (nominal); EDR modulation accuracy: 1.2% - Support multi-touch user interface and SCPI remote interface programming ** 目前W9081A Bluetooth® 量測應用軟體已停產,可由N9081EM0E PathWave X 系列量測應用軟體取代,歡迎右下角洽詢小編 **  * 延伸查看:查看可搭配本軟體使用的主機 CXA系列信號分析儀/頻譜分析儀 * 延伸查看:[技術文章] 使用頻譜分析儀執行EMI相符性量測與克服現場測試時微波干擾信號挑戰
N9082EM0E LTE And LTE-Advanced TDD Measurement Application, Multi-Touch UI
Keysight N9082EM0E LTE And LTE-Advanced TDD Measurement Application, Multi-Touch UI Perform LTE and LTE-Advanced TDD base station (eNB) and user equipment (UE) transmitters one-button measurements with pass/fail tests as defined by 3GPP standard. * N9082EM0E 主要技術規格 - Performance LTE and LTE-Advanced TDD transmitter one-button uplink and downlink measurements with pass/fail tests per 3GPP standard Release 8 to 15 - Pre-defined E-UTRA Test Configurations for multi-carrier (MC) and carrier aggregation (CA) - View and analyze up to five component carriers (CCs) simultaneously in both contiguous and non-contiguous configurations - Pursue improved spectral efficiency with higher order demodulation to 1024QAM - Spectrum and power measurements: channel power, SEM, cumulative SEM, ACLR, cumulative ACLR (CACLR), OBW, spurious emissions, transmitter intermodulation - Modulation analysis measurements: EVM, frequency error, time alignment error, RSTP, OSTP, I/Q offset and more. Pinpoint signal impairments with color-coded traces like EVM vs. symbol, EVM vs. subcarrier, detected allocations (subcarrier vs. symbol), constellation diagram, and frame summary - Performance: Residual EVM, 5 MHz downlink signal: up to 0.34% (0.28% nominal); ACLR, 5 MHz E-UTRA adjacent channel: up to -83.5 dB (nominal); Absolute power accuracy: up to 0.19 dB - Support multi-touch user interface and SCPI remote interface programming - KeysightCare software support subscription included  
N9083EM0E 多標準無線信號 (MSR) 量測應用軟體
Keysight N9083EM0E 多標準無線信號 (MSR) 量測應用軟體 Perform cellular transmitters one-button measurements with pass/fail tests as defined by 3GPP standards. * N9083EM0E Multi-Standard Radio (MSR) Measurement Application, Multi-Touch UI - Perform MSR (Multi-Standard Radio) measurement per 3GPP standard (TR/TS 37 series) - Support transmitter test on any combination of the following 3GPP and 3GPP2 signals: LTE-FDD, LTE-TDD, W-CDMA/HSPA/HSPA+, GSM/EDGE/EDGE Evolution - Provides automatic sequencing function to eliminate the need for the wide analysis bandwidth option, reducing equipment cost for manufacturing - Modulation analysis measurements: EVM, frequency error plus more error metrics not tied to conformance test - Spectrum and power measurements: channel power, spectrum emission mask (SEM), normal adjacent channel power (ACP) for contiguous test configuration, cumulative ACP for non-contiguous test configuration, transmitter spurious emissions - Perform multi-carrier/multi-format measurements in one measurement sequence for channel power, ACP, SEM, spurious emissions and conformance EVM - Supports carrier allocating algorithm with preset selection based on contiguous and non-contiguous Test Configuration (TC) definitions in the 3GPP standard - Performance * EVM floor (nominal): GSM/EDGE (0.6%), W-CDMA (1.5 %), LTE- FDD/TDD (0.36%) and TD-SCDMA (1.5%) * Power accuracy: Up to 0.19 dB * Support multi-touch user interface and SCPI remote interface programming * KeysightCare software support subscription included
N9063EM0E Analog Demodulation Measurement Application, Multi-Touch UI
Keysight N9063EM0E Analog Demodulation Measurement Application, Multi-Touch UI Perform transmitters with one-button analog demodulation measurements for AM, FM, PM and FM Stereo/RDS signals. Keysight N9063EM0E - Perform modulation analysis for AM, FM, PM and FM Stereo signals with information bandwidth - Analyze analog modulated signals with a selection of detectors: Peak+, Peak-, (Pk-Pk)/2 and RMS - Play the modulating signal over a speaker (sometimes referred to as "tune and listen") - Supplies most complete set of post-demodulation filters - Provide display modulation metrics such as AM depth, FM deviation, PM deviation, total harmonic distortion (THD), and signal to noise distortion ratio (SINAD), FM Stereo (left to right ratio, mono to stereo ratio, 38 kHz pilot frequency and phase error) - Support view RF spectrum, demodulated waveform, AF (modulating signal) spectrum, and demodulation metrics table at the same time with quad view; view MPX, mono, stereo, left and right channel and RDS/RBDS decoding of FM stereo signal; view transmitter "attach/release" timing - Performance  - AM depth accuracy: (0.1% x reading + 0.05%); AM rate accuracy: [(2.5 ppm x reading) x (100% / depth)] - FM deviation accuracy: (0.3% x reading + 0.15% x rate); FM rate accuracy: (0.008% x reading) - PM deviation accuracy: (0.1% x reading + 2 mrad); PM rate accuracy: (0.008 Hz / deviation + 0.003 Hz) - FM Stereo SINAD up to 71 dB and left to right ratio up to 76 dB with CCITT filter  - Support multi-touch user interface and SCPI remote interface programming - KeysightCare software support subscription included